Delta HC 500
XY positioning accuracy - within 15 microns
Z positioning accuracy - within 15 microns
Repeatability accuracy – within 15 microns
Auto Bed level height map – within 50 microns
Nozzle Diameter: 0.4mm, 0.5mm all metal all metal
Single Headed Dual Extrusion: Switching Material technology allows to print two materials with One Nozzle
Printing Mode: Color1-Color2, Model Material-Support Material, Model Material1-Model Material2
Layer Resolution - Minimum 100 microns to maximum 600 microns
3D printed part accuracy: +/- 0.15 mm or 0.15% Of printed dimension whichever is higher.
Wall Thickness: 0.48mm or lower
Bed Temprature : 30°C - 150°C
Nozzle Temprature : 30°C - 300°C
Heated Chamber Temperature: 30°C - 70°C
Hot air circulation for optimized printing
Technical Support Customizable Plan
Traning Material: 3D printing guide. Installation instructions, Calibration guide, Maintainence guide.
Software Support: Software Training over VPN, GCode generation over VPN, Calibration over VPN.
Hardware Support: Troubleshooting and Hardware maintainence over video call.
Training & Installation: 1st visit Free Includes Training, Installation & Commisioning
Warranty: 1 Year Warranty
Bed Size / Print size (X Y Z) - 500mm x 500mm x 600mm
Build Environment: Hot Air Circulation Chamber, With Heated Chamber
Built Surface: Stick Build Surface
Material Tracking System
Material Tracking System is the unique feature provided to you for the exact tracking of the system for better utilization of the time and filament.
Material Dehumidifier: Needs to Procure separately
Printing Filaments / Multimaterial
Filament Diameter - 1.75mm
Supportable Filaments - PLA, ABS, Flame Retardant ABS, Transparent ABS, ASA, Nylon, Carbon Fiber PLA, Carbon Fiber ABS, Carbon Fiber Nylon, Carbon Fiber PETG, Carbon Fiber PC, PETG, High Temperature PETG, Low Gloss PETG, Glass Fiber PETG, PC ABS, PC ASA, PVA, HIPS and more
Dual head allow to print two materials simultaneously
Printing mode: Color1-Color2, Model Material-Support Material, Model Material1-Model Material2
One head comes with extruder on fly
Traning material: Postprocessing techniques guide, Finishing techniques guide , Support removal guide
Support: Postprocessing expert via call and video call.
Auto Bed leveling
Leveling Mode - Automatic, Semiautomatic
Software: Simplfy 3D
Supporting documents : Hardware setup guide , tutorial guide, tutorial videos ,quick start guide, quality guide
TCP/IP 10/100 base T, Ethernet Protocol. Advanced connectivity with WIFI allows to control the machine remotely, transfer jobs, monitor current jobs, give order for new job
External Web cam makes this system easier to operate from the remote location. Make this system much handy to operate.
Touch Screen Display
Wide touch screen panel gives you the technical details of machine and allow you to operate enitre machine on the touch screen.
3D Print Accuracy
Dimensional accuracy XY is the amount of dimensional deviation that is measured between your CAD model (Computer drawing) and actual printed object in XY (Horizontal direction).
Dimension Dual delta comes with a 3D printed part which is calibrated and tested for its XY Dimensional accuracy which is within 0.5mm.
Dimensional accuracy should not be confused with the XY positional accuracy which is 10 microns or the layer height (printing resolution).
Auto Bed Leveling
Dimensional dual delta is capable of measuring heights of the bed at multiple points. This is repeated until the head is leveled with respect to the bed.
Height map accuracy is within 50 microns.
Dimensional Dual Delta can be calibrated in Semiautomatic mode or Automatic mode.
In semiautomatic mode the values are feeded and adjusted manually by the user.
In automatic mode the machine will measure then calculate,adjust the values and will repeat this procedure until the head is leveled with respect to the bed.
The Dimensional dual delta comes with a 3D printed part, which is calibrated and tested by our 3D Printing Experts.
Both the head are measured and leveled manually. Not only the hardware but also the software is preconfigured for dual head printing. This ensures that you have a seemless experience with printing dual color or printing with two different material.
Material Optimized Swappable Head
Now you can configure your printer to print fast or print accurate by just changing the head.
Swappable head makes dimensional dual delta a multimaterial printer where you can just swap an optimized head for the material you want to print with.
Easy to change the head in just two steps. Unplug the connectors and slide out the first head then slide in the new head into its socket and plug the two connectors back. The machine is ready to print.
Our 3D printing experts ensures that you have a perfect first layer printed. 3D Printing, it's very important that your first layer is printed perfectly. This ensures that your part will build without any errors.
For every dimensional dual delta 3d printer that is manufactured, first layer height is measured and analysed to ensure our quality standards.